ThermoLab Co.,Ltd. - Nano Silencer for Mini-ITX, Low Profile Case

CPU cooler

Nano Silencer 2009

PCT (Power Clamping Technology)
- Minimization
- Low noise
- Thermal stability
Design compatibility
- Mini-ITX, Micro ATX form factor
- Low Profile (LP) case
- Compatible with Pannel Pc, Tunning Pc, Car PC
Stable structure
- Stable mounting method
- Light weight

* Nano Silencer 2009 is for
Intel Socket 775 CPUs, AMD Socket AM2+/AM2 CPUs

Feature

Specs

Guide

Data

Others

1. Application of Power Clamping Technology (PCT)
	"Power Clamping Technology" is a new technology developed by ThermoLab that makes base block, heat pipe and aluminum fins to strongly combine thermally by aligning heat pipe and fins after making minute size groove in the base block then combining through tens of tons of power. By applying Power Clamping Technology, "Nano silencer" not just makes lower noise and miniaturization possible, but also maximizes CPU stability. Through effective integration of PCT (Power Clamping Technology) and Sintered Powder Heat Pipe, difference in performance resulted by installation direction, which is the weakest point of the heat pipe cooler, doesn't occur.

2. Design compatibility
	Compact Size "Nano silencer" performs its best on Mini ITX motherboards as well as Micro ATX standards. It shows excellent compatibility in slim cases and low profile cases with limited space. Low noise Heat sink of "Nano silencer" has an excellent cooling performance, and makes low noise by applying PWM Control fan..

Feature

Specs

Guide

Data

Others

1. Applicable CPU

Socket Standards : Intel Socket 775 CPUs, AMD Socket AM2+/AM2 CPUs
Thermal Design Power of CPU : below 100Watt
Motherboard Standards : Mini ITX, Micro ATX, ATX

2. Components
	Cooler Assembly Fixing Parts Manual Fixing bolts for clip Clip for AM2, AM2+ Push rivet to fix cooler Backplate Fixing bolts for cooler Driver to fix cooler

3. Specification

Product Name		Nano Silencer 2009
Dimension		99.5 x 88.2 x 39 (L x W x H)mm
Weight		214g (Heat sink and Fan)
Heatsink Material		Pure copper (Heat Pipe), Aluminum(Base Block, Fins)
Dissipation Area		1,250 cm²
FAN	Dimension	80 x 80 x 15mm
	Speed	Less than 3,000rpm ± 10%
	Noise Level(1)	30.5dB(A) at 3,000rpm
	Bearing Type	Rifle Bearing
	Control Method	PWM, Auto Restart, Locked Current protection
	Fan Life Expectancy	70,000hr continuous at 40℃, 15~65% relative humidity
TIM (Thermal Interface Material)	Thermal Conductivity	8 W/mK (ASTM D 5470)
	Viscosity	190 Pa·s
	Density	2.6 g/cm³
	Color	Gray

Note(1) : Measured at a point of 1m away from noise sources.

Feature

Specs

Guide

Data

Others

How to Install

For Intel Socket 775

1. Connect the bolt with the insulation washer.
	As the picture shows, connect the bolt in the package of fixing parts.

2. Installation direction
	Check if there is interference between the cooler and the parts on the motherboard, and decide the installation direction of the cooler. If there's no interference, we recommend you to install the bending direction of the heat pipe of the cooler towards the direction of RAM slot as the picture on the left shows.

3. Installation of the product
	As the picture on the left shows, on the rear of the motherboard, fasten lightly the two bolts with the insulation washer in the holes placed diagonally across from each other to lock the cooler clips. Fasten lightly the other two bolts with insulation washer in the holes placed diagonally across from each other to lock the cooler clips. Fasten all the bolts tightly to fix the cooler.

4. Fan Power Connection

Connect the connector of the fan installed in the Nano silencer to the CPU fan connector (4pins) on the motherboard.

5. Motherboard BIOS Setting

Set PWM control to eanble in the motherboard BIOS. Refer to the motherboard manual as installation instructions depend on motherboard makers.

For AMD Socket AM2+/AM2 CPUs

1. In the case of using backplate
	Remove existing backplate and retention frame which are attached to motherboard. Remove clip for socket 775 of Nano Silencer and fix “⑤ Clip for AM2, AM2+” using “④ Fixing bolts for clip”. Insert the projected parts of “⑦ Backplate”into the holes from the back side of motherboard and then fix it. Set Nano Silencer 2009 on CPU correctly. Tighten “⑧ Fixing bolts for cooler” into the nuts of “⑦ Backplate” slightly using enclosed “⑨ Driver to fix cooler”. Tighten “⑧ Fixing bolts for cooler” sufficiently in turns diagonally. Connect the connector of the fan to the CPU fan connector (4 pins) of motherboard.

2. In the case of not using backplate interrupting by the backside parts of the motherboard.
	Remove existing backplate and retention frame which are attached to motherboard. Remove clip for socket 775 of Nano Silencer and fix “⑤ Clip for AM2, AM2+” using “④ Fixing bolts for clip”. Set Nano Silencer 2009 on CPU correctly. Combine enclosed a pair of “⑥ Push rivet to fix cooler”. Push “⑥Push rivet to fix cooler” in “⑤ Clip for AM2, AM2+” gently through a hole from the backside motherboard. Tighten “⑥Push rivet to fix cooler” sufficiently in turns diagonally as appeared left picture. Connect the connector of the fan to the CPU fan connector (4 pins) of motherboard.

Feature	Specs	Guide	Data	Others

Feature

Specs

Guide

Data

Others

1. Reviews

2. Warranty

Warranty period is one year from the date of purchase and covers any defects of the product in materials or workmanship free of charge. But, any damages or malfunction caused by customer faults shall be charged.

3. Download